Easy Operate N95 Face Mask Making Machine / N95 Particulate Mask Machine Medical
N95 mask equipment is the special equipment for the production of disposable N95 masks.It can automatically complete the mask body molding,automatic nose bridge reinforcement, and automatic ear band welding.
It is the auto equipment which is used to the product of face masks,It suitable for the material of non woven fabric, activated carbon and filter material from 1-5 layers. The face mask machine will finish all the processing from the feeding to nose-clip fixing, edge sealing, cutting the finished products.
According to the different materials you use, the finished products can reach the standards as N95, FFP2, etc.This face mask machine has features as stable performance, high productivity, low error rate and easy operation, etc.
| Size | 6800mm(L)×3600mm(W)×1900mm(H) |
| Mask specification | 175*95mm |
| Production efficiency | 100-120PCS/min |
| Qualification rate | 98-99% |
| Failure rate | 2% |
| Weight | ≤2100kg, ground load bearing > 300kg |
| Working power | 220VAC ± 5%, 50z, rated power about 6.5-8.5KW |
| Compressed air | 0.5 ~ 0.7MPa, the use flow rate is about 300L / min |
| Operating environment | temperature 10 ~ 35 ºC, humidity 5-35% HR, no flammable and corrosive gas, no dust (cleanness not less than 100,000). |
Plane Mask Production Process:
1) Three layers of non-woven fabric materials are stacked together through a machine
2) Roll up and stitch the nose clip into it
3) Make a large piece of non-woven fabric gradually narrow from left to right along the slope to make a "folding structure"
4) Tableting: flatten the surface of the mask
5) Fully automatic single cutting and hemming of masks
6) Then use a non-woven fabric to trim the mask
7) Cut the edge again
8) Fix the hanging ear rope by hot pressing
9) Finally pass the quality inspection, sterilize and package the finished product
Warranty period and service
During the warranty period, if it is a product quality problem, the supplier shall be responsible for the maintenance and provide the maintenance accessories (vulnerable parts, such as ultrasonic waves and mufflers, force majeure or the buyer's reason for the equipment damage, it does not belong to the quality warranty scope).If the equipment is damaged due to the buyer's fault, the maintenance fee shall be borne by the buyer. If the buyer USES repair services or replacement parts not provided by the supplier or approved by the supplier, the warranty period will be suspended in advance.
